Siemens SIMATIC PCS 7 Configuration Manual

5.2 Required settings in the SIMATIC Manager
Introduction
Before creating a multiproject, you should check the default settings of the SIMATIC Manager
and adapt them to your requirements. The defaults settings can be edited in the SIMATIC
Manager under "Options > Settings…".
The online help is available in every dialog to provide you with an exact description of the
optional settings. Practical settings which can make configuration work easier are listed below.
General
Set the storage location for projects to a directory in a data partition.
If you use another project path, you need to set the necessary access rights using the
"SimaticRights.exe" application. You will find the application "SimaticRights.exe" on the DVD
2 "Process Control System SIMATIC PCS 7" under "Additional_Products\SimaticRights
\SimaticRights.exe".
Language
Once the country language has been set you can determine whether the I/O address concept
for the multiproject to be created should be based on German (e.g. AW512) or English (e.g.
QW512).
Creating and managing a PCS 7 project
5.2 Required settings in the SIMATIC Manager
Compendium Part A - Configuration Guidelines (V8.2)
46 Configuration Manual, 08/2016, A5E38166869-AA

Siemens SIMATIC PCS 7 Specifications

General

Brand	Siemens
Model	SIMATIC PCS 7
Category	Control Systems
Language	English