Siemens SIMATIC PCS 7 Configuration Manual

5.5 Adding Additional Stations
Once the projects have been created you will insert the automation systems (AS) and the PC
stations in this section in accordance with your plant layout.
Note
The network adapters for the terminal bus are not configured.
You should use the following project structure as a template for creating these:
Creating and managing a PCS 7 project
5.5 Adding Additional Stations
Compendium Part A - Configuration Guidelines (V8.2)
Configuration Manual, 08/2016, A5E38166869-AA 55

Siemens SIMATIC PCS 7 Specifications

General

Brand	Siemens
Model	SIMATIC PCS 7
Category	Control Systems
Language	English