Siemens SIMATIC PCS 7 Configuration Manual

Figure 5-1 Download connections
5.5.4 OS clients
Introduction
By creating the stations in the project "20_OS" an OS client station has already been created
which was renamed to "CLIENT01" in the previous section.
This OS client can be configured and started accordingly in the later configuration stages.
Furthermore the connection to OS servers already activated can also be tested.
The OS clients for the plant operator are created later once the configuration is complete in
the separate project "21_CL".
Procedure
The following steps demonstrate how to create the station "CLIENT02" :
1. Copy the completed station "CLIENT01" from project "20_OS" to project "21_CL" and
rename it to "CLIENT02".
2. Rename the OS client project in the SIMATIC Manager as "CL02".
3. Enter the path for the target OS in the object properties.
A shared folder with write access must be available on the target OS.
Creating and managing a PCS 7 project
5.5 Adding Additional Stations
Compendium Part A - Configuration Guidelines (V8.2)
68 Configuration Manual, 08/2016, A5E38166869-AA

Siemens SIMATIC PCS 7 Specifications

General

Brand	Siemens
Model	SIMATIC PCS 7
Category	Control Systems
Language	English