Using OS reference clients
OS reference clients are always used when all settings on several OS clients are identical.
Each configured OS client can be used as a basis for further clients. Creation and maintenance
efforts along with the project scope for operator stations are reduced considerably as a result.
In the example project, the stations "CLIENT03" and "CLIENT04" should be identical to station
"CLIENT02".
Creating and managing a PCS 7 project
5.5 Adding Additional Stations
Compendium Part A - Configuration Guidelines (V8.2)
Configuration Manual, 08/2016, A5E38166869-AA 69
To Next Page
Loading...
Need help?
General
