Siemens SIMATIC PCS 7 Configuration Manual

8.1.4 Changing the message class, priority and message text
Introduction
You can change the message class, priority, and message text for all function blocks.
Note
Please take note of the "Aspects of Message Configuration" table in this regard in the "SIMATIC
Process Control System PCS 7 Engineering System" (https://support.industry.siemens.com/
cs/ww/en/view/109485969) manual.
The appearance of limit violations at the block can be influenced in process control in group
displays and in message lists. The "User-configurable message classes" function is available
for this purpose.
You can find additional information on the topic of "User-configurable message classes" in the
manual "SIMATIC Process Control System PCS 7 Engineering System" (https://
support.industry.siemens.com/cs/ww/en/view/109485969).
Configuring AS functions
8.1 Principles
Compendium Part A - Configuration Guidelines (V8.2)
156 Configuration Manual, 08/2016, A5E38166869-AA

Siemens SIMATIC PCS 7 Specifications

General

Brand	Siemens
Model	SIMATIC PCS 7
Category	Control Systems
Language	English