5.7 Sharing out configuration work
Introduction
Engineering management within a multiproject without any division of labor is a standard
practice.
However, if the goal is to shorten the configuration time by working in parallel, as of PCS 7
Version 7.0 SP1 the question of the most suitable method arises, because multi-user
engineering has now been introduced as well as multiproject engineering.
Multiproject engineering
Individual projects can be allocated to distributed engineering stations for rapid and flexible
AS configuration. PCS 7 offers the appropriate system functions for managing, distributing and
merging the projects. Projects can be separated from the multiproject in order for them to be
processed on other engineering stations, e.g. in an office environment. Once they have been
processed these projects are reintegrated into the central multiproject of the plant.
Note
You can find additional information in the "SIMATIC Process Control System PCS 7
Engineering System" manual and in the "PCS 7 Multiproject / Multi-user Engineering (https://
support.industry.siemens.com/cs/ww/en/view/22258951)" programming manual.
Multiproject Engineering with SIMATIC BATCH
Information on multiproject engineering with SIMATIC BATCH can be found in the following
documents:
● Multiproject Engineering with SIMATIC BATCH (https://support.industry.siemens.com/cs/
ww/en/view/23785345)
● SIMATIC Process Control System PCS 7 SIMATIC BATCH (https://
support.industry.siemens.com/cs/ww/en/view/109485956)
Creating and managing a PCS 7 project
5.7 Sharing out configuration work
Compendium Part A - Configuration Guidelines (V8.2)
80 Configuration Manual, 08/2016, A5E38166869-AA
To Next Page
Loading...
Need help?
General
