errors in the redundancy connections, the OS client switches to the OS server with the most
active/error-free connections.
Note
If no preferred server is entered in the "Configure the Server Data" dialog, the OS clients
interconnect to the OS server that is designated as the master.
The information contained in the "Configure the Server Data" dialog originates from server
data, which was assigned to the corresponding OS client.
Configuring OS functions
10.1 Project settings
Compendium Part A - Configuration Guidelines (V8.2)
Configuration Manual, 08/2016, A5E38166869-AA 203
To Next Page
Loading...
Need help?
General
