Parameter Description Factory setting
p1013[D] CO: Fixed speed setpoint 13 0 rpm
p1014[D] CO: Fixed speed setpoint 14 0 rpm
p1015[D] CO: Fixed speed setpoint 15 0 rpm
p1016 Fixed speed setpoint selection mode 1
p1020[C] Fixed speed setpoint selection, bit 0 0
p1021[C] Fixed speed setpoint selection, bit 1 0
p1022[C] Fixed speed setpoint selection, bit 2 0
p1023[C] Fixed speed setpoint selection, bit 3 0
r1024 Fixed speed setpoint active - rpm
r1025.0 Fixed speed setpoint status -
p1070[C] CI: Main setpoint Dependent on the
converter
p1071[C] CI: Main setpoint scaling 1
r1073 CO: Main setpoint active - rpm
p1075[C] CI: Supplementary setpoint 0
p1076 CI: Supplementary setpoint scaling 1
r1077 CO: Supplementary setpoint eective - rpm
Advanced commissioning
8.16 Setpoints
Distributed converter for SIMOGEAR geared motors
268 Operating Instructions, 10/2020, FW V4.7 SP13, A5E31298649B AL
To Next Page
Loading...
