Sindoh C300 - Page 191

12-43
Troubleshoot a problem
12
Action Yes No
1)UsingthePrintQualityTestPages,measurethedistance
between the repeating defects on the affected color page.
2)Checkiftherepeatingdefectsmatchanyofthefollowing
measurements:
Print cartridges
- 25.70mm(1.01in.)
- 35.30mm(1.39in.)
- 75.6mm(2.98in.)
- 26.7mm(1.05in.)
Fuser
- 56.5mm(2.22in.)
Transfer module
- 25.10mm(0.99in.)
- 59.70mm(2.35in.)
- 28.30mm(1.11in.)
- 65mm(2.56in.)
- 44mm(1.73in.)
Do the repeating defects match any of the
measurements?
Take note of the
distance, and then
contact customer
support.
Take note of the
distance, and then
contact customer
support.