10-23
Use printer menus
10
Fax Send Settings
Menu Item Description
Resolution
Standard*
Fine
Super Fine
Ultra Fine
Set the resolution of the scanned image.
Note
‑
A higher resolution increases fax transmission time and requires
higher memory.
Original Size
[List of paper sizes]
Specify the size of the original document.
Note
‑
Letter is the U.S. factory default setting. A4 is the international factory
default setting.
Orientation
Portrait*
Landscape
Specify the orientation of the original document.
Note
‑
This menu item appears only in some printer models.
Sides
Off*
Long Edge
Short Edge
Specify the orientation of the original document when scanning on both
sides of the document.
Note
‑
This menu item appears only in some printer models.
Content Type
Text*
Text/Photo
Photo
Graphics
Improve the output result based on the content of the original document.
Darkness
1–9 (5*)
Adjust the darkness of the scanned image.
Behind a PABX
On*
Off
Set the printer to dial a fax number without waiting to recognize the dial
tone.
Note
‑
Private Automated Branch Exchange (PABX) is a telephone network
that allows a single access number to offer multiple lines to outside
callers.
Dial Mode
Tone*
Pulse
Specify the dial mode for incoming or outgoing faxes.
Note: An asterisk (*) next to a value indicates the factory default setting.
Advanced Imaging
Menu Item Description
Color Balance
Cyan ‑ Red
‑4 to 4 (0*)
Magenta ‑ Green
‑4 to 4 (0*)
Yellow ‑ Blue
‑4 to 4 (0*)
Adjust the color intensity during scanning.
Note: An asterisk (*) next to a value indicates the factory default setting.
To Next Page
Loading...
