Use printer menus
10-24
10
Menu Item Description
Contrast
Best for Content*
0
1
2
3
4
5
Set the contrast of the output.
Background Removal
Level
‑4 to 4 (0*)
Adjust the amount of background visible on a scanned image.
Scan Edge to Edge
On
Off*
Allow edge‑to‑edge scanning of the original document.
Note: An asterisk (*) next to a value indicates the factory default setting.
Admin Controls
Menu Item Description
Automatic Redial
0‑9 (5*)
Adjust the number of redial attempts based on the activity levels of
recipient fax machines.
Redial Frequency
1‑200 minutes (3*)
Increase the time between redial attempts to increase the chance of
sending fax successfully.
Enable ECM
On*
Off
Activate Error Correction Mode (ECM) for fax jobs.
Note
‑
ECM detects and corrects errors in the fax transmission process
caused by telephone line noise and poor signal strength.
Enable Fax Scans
On*
Off
Fax documents that are scanned at the printer.
Driver to Fax
On*
Off
Allow the print driver to send fax.
Allow Save as Shortcut
On*
Off
Save fax numbers as shortcuts in the printer.
Max Speed
33600*
14400
9600
4800
2400
Set the maximum speed for sending fax.
Enable Color Fax Scans
Off by default*
On by default
Never use
Always use
Enable color scans for fax.
Note: An asterisk (*) next to a value indicates the factory default setting.
To Next Page
Loading...
