U
SER
A
UTHENTICATION
3-61
the client to select either DES (56-bit) or 3DES (168-bit) for data
encryption.
• Save Host-Key from Memory to Flash – Saves the host key from
RAM (i.e., volatile memory to flash memory. Otherwise, the host key
pair is stored to RAM by default. Note that you must select this item
prior to generating the host-key pair.
• Generate – This button is used to generate the host key pair. Note that
you must first generate the host key pair before you can enable the SSH
server on the SSH Server Settings page.
• Clear – This button clears the host key from both volatile memory
(RAM) and non-volatile memory (Flash).
Web – Click Security, SSH, Host-Key Settings. Select the host-key type
from the drop-down box, select the option to save the host key from
memory to flash (if required) prior to generating the key, and then click
Generate.
Figure 3-27 SSH Host-Key Settings
To Next Page
Loading...
Need help?
General
