SMC Networks TigerSwitch User Manual

P RIORITY C OMMANDS
4-229
Priority Commands (Layer 3 and 4)
map ip port (Global Configuration)
This command enables IP port mapping (i.e., class of service mapping for
TCP/UDP sockets). Use the no form to disable IP port mapping.
Syntax
[no] map ip port
Table 4-60 Priority Commands (Layer 3 and 4)
Command Function Mode Page
map ip port Enables TCP class of service mapping GC 4-229
map ip port Maps TCP socket to a class of service IC 4-230
map ip precedence Enables IP precedence class of service
mapping
GC 4-229
map ip precedence Maps IP precedence value to a class of
service
IC 4-232
map ip dscp Enables IP DSCP class of service
mapping
GC 4-233
map ip dscp Maps IP DSCP value to a class of service IC 4-233
map access-list ip Sets the CoS value and corresponding
output queue for packets matching an
ACL rule
IC 4-128
map access-list mac Sets the CoS value and corresponding
output queue for packets matching an
ACL rule
IC 4-134
show map ip port Shows the IP port map PE 4-235
show map ip
precedence
Shows the IP precedence map PE 4-236
show map ip dscp Shows the IP DSCP map PE 4-237
show map access-list
ip
Shows CoS value mapped to an access list
for an interface
PE 4-129
show map access-list
mac
Shows CoS value mapped to an access list
for an interface
PE 4-135

SMC Networks TigerSwitch Specifications

General

Brand	SMC Networks
Model	TigerSwitch
Category	Switch
Language	English