SMC Networks TigerSwitch User Manual

GVRP AND B RIDGE E XTENSION C OMMANDS
4-217
bridge-ext gvrp
This command enables GVRP globally for the switch. Use the no form to
disable it.
Syntax
[no] bridge-ext gvrp
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
GVRP defines a way for switches to exchange VLAN information in
order to register VLAN members on ports across the network. This
function should be enabled to permit automatic VLAN registration,
and to support VLANs which extend beyond the local switch.
Example
show bridge-ext
This command shows the configuration for bridge extension commands.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
See “Enabling or Disabling GVRP (Global Setting)” on page 4 -147
and “Displaying Bridge Extension Capabilities” on page 4 -15 for a
description of the displayed items.
Console(config)#bridge-ext gvrp
Console(config)#

SMC Networks TigerSwitch Specifications

General

Brand	SMC Networks
Model	TigerSwitch
Category	Switch
Language	English