SMC Networks TigerSwitch - Figure 3-81 ACL Cos Priority

C ONFIGURING THE S WITCH
3-182
• ACL CoS Priority Mapping – Displays the configured information.
* For information on configuring ACLs, see page 3-77.
Web – Click Priority, ACL CoS Priority. Enable mapping for any port,
select an ACL from the scroll-down list, then click Add.
Figure 3-81 ACL CoS Priority
CLI – This example assigns a CoS value of zero to packets matching rules
within the specified ACL on port 24.
Console(config)#interface ethernet 1/24 4-146
Console(config-if)#map access-list ip bill cos 0 4-128
Console(config-if)#