4-153
Example
The following shows how to configure broadcast storm control at 600
packets per second:
clear counters
This command clears statistics on an interface.
Syntax
clear counters interface
interface
• ethernet unit/port
- unit - Stack unit. (Range: 1-8)
- port - Port number. (Range: 1-26)
• port-channel channel-id (Range: 1-4)
Default Setting
None
Command Mode
Privileged Exec
Command Usage
Statistics are only initialized for a power reset. This command sets the
base value for displayed statistics to zero for the current management
session. However, if you log out and back into the management
interface, the statistics displayed will show the absolute value
accumulated since the last power reset.
Example
The following example clears statistics on port 5.
Console(config)#interface ethernet 1/5
Console(config-if)#switchport broadcast octet-rate 600
Console(config-if)#
Console#clear counters ethernet 1/5
Console#
To Next Page
Loading...
Need help?
General
