SMC Networks TigerSwitch

G ENERAL C OMMANDS
4-31
Command Mode
Privileged Exec
Command Usage
This command resets the entire system.
Example
This example shows how to reset the switch:
end
This command returns to Privileged Exec mode.
Default Setting
None
Command Mode
Global Configuration, Interface Configuration, Line Configuration, and
VLAN Database Configuration.
Example
This example shows how to return to the Privileged Exec mode from the
Interface Configuration mode:
exit
This command returns to the previous configuration mode or exit the
configuration program.
Default Setting
None
Command Mode
Any
Console#reload
System will be restarted, continue <y/n>? y
Console(config-if)#end
Console#