S
YSTEM
M
ANAGEMENT
C
OMMANDS
4-87
Example
Frame Size Commands
jumbo frame
This command enables support for jumbo frames. Use the no form to
disable it.
Syntax
[no] jumbo frame
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
• This switch provides more efficient throughput for large sequential
data transfers by supporting jumbo frames up to 9216 bytes.
Compared to standard Ethernet frames that run only up to 1.5 KB,
Console#show version
Unit 1
Serial number: S416000963
Service tag:
Hardware version: R0A
Module A type: 1000BaseT
Module B type: 1000BaseT
Number of ports: 26
Main power status: up
Redundant power status: not present
Agent(master)
Unit ID: 1
Loader version: 2.2.1.1
Boot ROM version: 2.2.1.2
Operation code version: 2.2.5.3
Console#
Table 4-24 Frame Size Commands
Command Function Mode Page
jumbo frame Enables support for jumbo frames GC 4-87
To Next Page
Loading...
Need help?
General
