S
YSTEM
M
ANAGEMENT
C
OMMANDS
4-35
Example
User Access Commands
The basic commands required for management access are listed in this
section. This switch also includes other options for password checking via
the console or a Telnet connection (page 4-14), user authentication via a
remote authentication server (page 4-95), and host access authentication
for specific ports (page 4-108).
Console(config)#hostname RD#1
Console(config)#
Table 4-9 User Access Commands
Command Function Mode Page
username Establishes a user name-based authentication
system at login
GC 4-36
enable password Sets a password to control access to the
Privileged Exec level
GC 4-37
To Next Page
Loading...
