C
ONFIGURING
THE
S
WITCH
3-130
CLI
– This command displays global STA settings, followed by settings for
each port
.
Note: The current root port and current root cost display as zero when
this device is not connected to the network.
Console#show spanning-tree 4-196
Spanning-tree information
---------------------------------------------------------------
Spanning tree mode :RSTP
Spanning tree enable/disable :enabled
Priority :32768
Bridge Hello Time (sec.) :2
Bridge Max Age (sec.) :20
Bridge Forward Delay (sec.) :15
Root Hello Time (sec.) :2
Root Max Age (sec.) :20
Root Forward Delay (sec.) :15
Designated Root :32768.0.0000ABCD0000
Current root port :1
Current root cost :200000
Number of topology changes :1
Last topology changes time (sec.):13380
Transmission limit :3
Path Cost Method :long
.
.
.
To Next Page
Loading...
Need help?
General
