SMC Networks TigerSwitch User Manual

S YSTEM M ANAGEMENT C OMMANDS
4-77
Example
Related Commands
show sntp (4-75)
calendar set
This command sets the system clock. It may be used if there is no time
server on your network, or if you have not configured the switch to receive
signals from a time server.
Syntax
calendar set hour min sec {day month year | month day year}
• hour - Hour in 24-hour format. (Range: 0-23)
• min - Minute. (Range: 0-59)
• sec - Second. (Range: 0-59)
• day - Day of month. (Range: 1-31)
• month - january | february | march | april | may | june | july |
august | september | october | november | december
• year - Year (4-digit). (Range: 2001-2100)
Default Setting
None
Command Mode
Privileged Exec
Example
This example shows how to set the system clock to 15:12:34, April 1st,
2004.
Console(config)#clock timezone Japan hours 8 minute 0 after-UTC
Console(config)#
Console#calendar set 15 12 34 1 April 2004
Console#

SMC Networks TigerSwitch Specifications

General

Brand	SMC Networks
Model	TigerSwitch
Category	Switch
Language	English