SMC Networks TigerSwitch User Manual

B ASIC C ONFIGURATION
3-25
- running-config to startup-config – Copies the running config to the
startup config.
- running-config to tftp
– Copies the running configuration to a TFTP
server.
- startup-config to file
– Copies the startup configuration to a file on the
switch.
- startup-config to running-config
– Copies the startup config to the
running config.
- startup-config to tftp
– Copies the startup configuration to a TFTP
server.
-tftp to file
– Copies a file from a TFTP server to the switch.
- tftp to running-config
– Copies a file from a TFTP server to the
running config.
- tftp to startup-config
– Copies a file from a TFTP server to the startup
config.
- file to unit
– Copies a file from this switch to another unit in the stack.
- unit to file
– Copies a file from another unit in the stack to this switch.
• TFTP Server IP Address – The IP address of a TFTP server.
• File Type – Specify config (configuration) to copy configuration
settings.
•
File Name — The file name should not contain slashes (\ or /), the
leading letter of the file name should not be a period (.), and the
maximum length for file names on the TFTP server is 127 characters
or 31 characters for files on the switch. (Valid characters: A-Z, a-z, 0-9,
“.”, “-”, “_”)
• Source/Destination Unit – Specifies the switch stack unit number.
Note: The maximum number of user-defined configuration files is
limited only by available flash memory space.

SMC Networks TigerSwitch Specifications

General

Brand	SMC Networks
Model	TigerSwitch
Category	Switch
Language	English