Tsunami Mode-Locked Ti:sapphire Laser
2-4
Maintenance Required to Keep this Laser Product in Compliance with
Center for Devices and Radio logical Health (
CDRH) Regulations
The actions listed below are required in order to keep the Tsunami laser
product in compliance with CDRH Regulations.
This laser product complies with Title 21 of the United States Code of Fed-
eral Regulations, Chapter 1, Subchapter J, Parts
1040.10 and 1040.11, as
applicable. To maintain compliance, verify the operation of all features
listed below, either annually or whenever the product has been subjected to
adverse environmental conditions (e.g., fire, flood, mechanical shock,
spilled solvents). This maintenance is to be performed by the user, as out-
lined below.
1. Verify that removing the laser head cover closes the laser shutter.
2. Verify that, when the cover interlock is defeated, the defeat mechanism
is clearly visible and prevents installation of the cover until disen-
gaged.
3. Verify that all labels listed in Figure 2-4, āTsunami Radiation Control
Drawing,ā are present and are firmly affixed.
To Next Page
Loading...