Spectra-Physics Tsunami - Table 3-5: Electrical, Mechanical and Physical Specifications; Table 3-6: Environmental Specifications

Tsunami Mode-Locked Ti:sapphire Laser
3-16
Table 3-5: Electrical, Mechanical and Physical Specifications
Electrical
Model 3955 Electronics Module 220 Vac, 0.5 A/110 Vac, 1.0 A
Model 3930 Electronics Module 220 Vac, 0.5 A/110 Vac, 1.0 A
Chiller (Refer to the instruction manual supplied with unit)
Mechanical
Model 3910 Pressure Range
Maximum 67 kPa (10 psi)
Inlet Temperature Range/Coolant for Ti:sapphire Rod
Minimum 15°C (59°F)
Maximum 20°C (69°F)
Physical
Weight:
Model 3960C Laser Head 35.38 kg (78.0 lb)
Model 3950C Laser Head 35.38 kg (78.0 lb)
Model 3941C Laser Head 35.38 kg (78.0 lb)
Model 3955 Electronics Module 7.17 kg (15.8 lb)
Model 3930 Lok-to-Clock Module 7.35 kg (16.2 lb)
Model 3910 2.36 kg (5.2 lb)
Chiller (Refer to the instruction manual supplied with unit)
Table 3-6: Environmental Specifications
For Indoor Use Only
Altitude Up to 2000 m
Ambient temperature 10–40°C
Maximum relative humidity 80% non-condensing for temperature up to 31°C
Mains supply voltage See Table 3-5
Installation category II
Pollution degree 2