S CLASS™ cutter User’s Manual
Setup 1-17
16. Press two times.
The communication menu will appear on screen.
17. Press .
The LAN menu will appear on screen.
18. Press
.
The DHCP menu will appear on screen.
19. Use or to set DHCP to on if necessarry.
On (inverse) will change.
20. Press to confirm.
The LAN menu will appear on screen.
21. Press .
The Configure menu will appear on screen.
22. Press to enter the first the IP address.
A mobile phone like keypad will appear on screen .
23. Enter the IP address. An IP address consists out of four 3-digit numbers. If the IP address,
received from the network administrator, has one or more numbers that have less than
a 3-digit number, then precede them by as many 0’s as necessary to get to a 3 digit
number.
The IP address will appear on screen .
24. Press .
The Configure menu will appear on screen.
25. Press to enter the subnet mask.
‘ subnet mask’ will become inverse.
26. Press to enter the first the subnet mask.
A mobile phone like keypad will appear on screen .
To Next Page
Loading...
