1-28 Sun Netra T5220 Server Service Manual • January 2012
service Runs POST with preset values for diag_level
and diag_verbosity.
diag_level max If diag_mode = normal, runs all the minimum
tests plus extensive CPU and memory tests.
min If diag_mode = normal, runs minimum set of
tests.
diag_trigger none Does not run POST on reset.
user_reset Runs POST upon user-initiated resets.
power_on_reset Only runs POST for the first power on. This
option is the default.
error_reset Runs POST if fatal errors are detected.
all_resets Runs POST after any reset.
diag_verbosity none No POST output is displayed.
min POST output displays functional tests with a
banner and pinwheel.
normal POST output displays all test and informational
messages.
max POST displays all test, informational, and some
debugging messages.
TABLE 1-7 ALOM CMT CLI Parameters Used for POST Configuration (Continued)
Parameter Values Description
To Next Page
Loading...
