Sun Microsystems Netra T5220 - Disabling Components

Chapter 1 Server Diagnostics 1-45
EXAMPLE 1-13 shows showcomponent command output with a component disabled:
1.8.2 Disabling Components
The disablecomponent command disables a component by adding it to the ASR
blacklist.
1. At the sc> prompt, enter the disablecomponent command
.
/SYS/MB/CMP0/L2_BANK0
/SYS/MB/CMP0/L2_BANK1
/SYS/MB/CMP0/L2_BANK2
/SYS/MB/CMP0/L2_BANK3
/SYS/MB/CMP0/L2_BANK4
/SYS/MB/CMP0/L2_BANK5
/SYS/MB/CMP0/L2_BANK6
/SYS/MB/CMP0/L2_BANK7
...
/SYS/TTYA
State: Clean
EXAMPLE 1-13 Output of the showcomponent Command Showing Disabled Components
sc> showcomponent
Keys:
/SYS/MB/RISER0/XAUI0
/SYS/MB/RISER0/PCIE0
/SYS/MB/RISER0/PCIE3
/SYS/MB/RISER1/XAUI1
/SYS/MB/RISER1/PCIE1
/SYS/MB/RISER1/PCIE4
/SYS/MB/RISER2/PCIE2
/SYS/MB/RISER2/PCIE5
...
/SYS/TTYA
Disabled Devices
/SYS/MB/CMP0/L2_BANK0Disabled by user
sc> disablecomponent /SYS/MB/CMP0/BR1/CH0/D0
Chassis | major: /SYS/MB/CMP0/BR1/CH0/D0 has been disabled.
Disabled by user
EXAMPLE 1-12 Output of the showcomponent Command With No Disabled Components