Sun Microsystems Netra T5220 - Removing the Air Duct

Chapter 4 Replacing Motherboard Assembly Components 4-17
5. See Chapter 6 to return the server to operation.
4.4 Replacing the Air Duct
4.4.1 Removing the Air Duct
1. Prepare the server for air duct removal. See Section 4.1, “Powering Off and
Powering On the Server” on page 4-1.
2. Facing the server, release the tab on the right of the air duct and pull upward
(
FIGURE 4-11).
3. Lift the duct out of the chassis, releasing it from the pins on the left side of the
chassis, and set it aside on an antistatic mat (
FIGURE 4-11).