Chapter 1 Server Diagnostics 1-23
1.4.5 Manually Cleaning PSH Diagnosed Faults
The ALOM CMT CLI clearfault command enables you to manually clear PSH
diagnosed faults from the service processor without a FRU replacement or if the
service processor was unable to automatically detect the FRU replacement.
● At the sc> prompt, type the clearfault command.
■ Example showing a fault being cleared manually using the clearfault
command:
1.4.6 Displaying the Server’s Environmental Status
The showenvironment command displays a snapshot of the server’s environmental
status. This command displays system temperatures, hard drive status, power supply
and fan status, front panel LED status, and voltage and current sensors. The output
uses a format similar to the Solaris OS command prtdiag (1m).
● At the sc> prompt, type the showenvironment command.
The output differs according to your system’s model and configuration.
sc> clearfault 7ee0e46b-ea64-6565-e684-e996963f7b86
To Next Page
Loading...
