Chapter 1 Server Diagnostics 1-47
1. Check for the presence of SunVTS packages using the pkginfo command.
TABLE 1-11 lists SunVTS packages:
■ If SunVTS software is installed, information about the packages is displayed.
■ If SunVTS software is not installed, you see an error message for each missing
package, as in
EXAMPLE 1-14
The SunVTS 6.0 PS3 software, and future compatible versions, are supported on the
server.
SunVTS installation instructions are described in the SunVTS User’s Guide.
1.9.2 Exercising the System Using SunVTS Software
Before you begin, the Solaris OS must be running. You also must ensure that SunVTS
validation test software is installed on your system. See Section 1.9.1, “Checking
Whether SunVTS Software Is Installed” on page 1-46.
The SunVTS installation process requires that you specify one of two security
schemes to use when running SunVTS. The security scheme you choose must be
properly configured in the Solaris OS for you to run SunVTS. For details, refer to the
SunVTS User’s Guide.
% pkginfo -l SUNWvts SUNWvtsr SUNWvtsts SUNWvtsmn
TABLE 1-11 SunVTS Packages
Package Description
SUNWvts SunVTS framework
SUNWvtsr SunVTS framework (root)
SUNWvtsts SunVTS for tests
SUNWvtsmn SunVTS man pages
EXAMPLE 1-14 Missing Package Errors for SunVTS
ERROR: information for "SUNWvts" was not found
ERROR: information for "SUNWvtsr" was not found
...
To Next Page
Loading...
