Contents v
1.9.2 Exercising the System Using SunVTS Software 1–47
1.9.3 Exercising the System With SunVTS Software 1–48
1.10 Obtaining the Chassis Serial Number 1–51
1.11 Additional Service Related Information 1–52
2. Preparing for Service 2–1
2.1 Safety Information 2–1
2.1.1 Safety Symbols 2–1
2.1.2 Electrostatic Discharge Safety 2–2
2.1.2.1 Use an Antistatic Wrist Strap 2–2
2.1.2.2 Use an Antistatic Mat 2–2
2.2 Required Tools 2–3
2.3 Prerequisite Tasks for Component Replacement 2–3
2.3.1 Powering Off the Server 2–3
2.3.2 Disconnecting Cables From the Server 2–4
2.3.3 Removing the Server From the Rack 2–5
2.3.4 Performing Antistatic Measures 2–8
2.3.5 Removing the Top Cover 2–8
2.3.6 Removing the PCI Mezzanine 2–9
2.4 Field-Replaceable Units 2–11
3. Replacing Storage Components 3–1
3.1 Replacing a Hard Drive 3–1
3.1.1 Removing a Hard Drive 3–2
3.1.2 Installing a Hard Drive 3–5
3.2 Replacing the Optical Media Drive 3–6
3.2.1 Removing the Optical Media Drive 3–6
3.2.2 Installing the Optical Media Drive 3–7
3.3 Replacing the Media Bay Assembly 3–8
To Next Page
Loading...
