viii Sun Netra T5220 Server Service Manual • January 2012
5.6.2 Installing the Alarm Board 5–16
5.7 Replacing the LED Board 5–17
5.7.1 Removing the LED Board 5–17
5.7.2 Installing the LED Board 5–19
5.8 Replacing the Power Board 5–22
5.8.1 Removing the Power Board 5–22
5.8.2 Installing the Power Board 5–24
6. Finishing Up 6–1
6.1 Tasks for Finishing Up 6–1
6.1.1 Installing the PCI Mezzanine 6–1
6.1.2 Installing the Top Cover 6–3
6.1.3 Removing Antistatic Measures 6–4
6.1.4 Reinstalling the Server Chassis in the Rack 6–5
6.1.5 Reconnecting Cables to the Server 6–7
6.1.6 Powering On the Server 6–8
A. Signal Pinouts A–1
A.1 Gigabit Ethernet Ports A–1
A.2 Network Management Port A–2
A.3 Serial Ports A–3
A.3.1 Serial Management Port A–3
A.3.1.1 RJ-45 to DB-9 Adapter Crossovers A–4
A.3.1.2 RJ-45 to DB-25 Adapter Crossovers A–5
A.3.2 Serial Port TTYA A–5
A.4 Alarm Port A–6
A.5 USB Ports A–7
Index Index–1
To Next Page
Loading...
