99
Servicing FRUs
The following sections describe how to service field-replaceable units (FRUs). You
must power down the system and disconnect the AC power cords from the server
before servicing any of these components.
Note – Only Oracle authorized service personnel should service FRUs.
Related Information
■ “Servicing CRUs That Do Not Require Server Power-Off” on page 45
■ “Servicing CRUs That Require Server Power-Off” on page 61
FRU Locations
The locations of the FRUs are shown in the following figure.
Description Link
Identify FRU locations. “FRU Locations” on page 99
Service the processor(s). “Servicing Processors (FRU)” on page 100
Service the disk backplane. “Servicing the Disk Backplane (FRU)” on
page 117
Service the front indicator module. “Servicing the Front Indicator Module (FRU)”
on page 125
Service the motherboard. “Servicing the Motherboard (FRU)” on
page 127
Service the server SAS cables. “Servicing the SAS Cables (FRUs)” on
page 138
To Next Page
Loading...
