Servicing CRUs That Require Server Power-Off 65
Related Information
■ “DIMM Population Example for Optimal System Performance” on page 65
■ “DIMM Population Rules” on page 67
■ “DIMM Rank Classification Labels” on page 69
■ “Inconsistencies Between DIMM Fault Indicators and the BIOS Isolation of Faulty
DIMMs” on page 70
DIMM Population Example for Optimal System
Performance
This section provides an example of how to populate the DIMM sockets to achieve
optimal system performance.
Note – Not all possible configurations are shown here.
The following figure shows the order in which the DIMM sockets should be
populated in dual-processor systems. In single-processor systems, you should follow
the same order except that you should not install DIMMs in the DIMM sockets
associated with processor 1 (P1) socket, because the P1 DIMM sockets are
nonfunctional.
FIGURE: DIMM Population Order
For more information on populating the DIMMs, see the following sections:
To Next Page
Loading...
