38 Sun Server X4-2 Service Manual • May 2014
3. Disconnect the power and data cables from the server.
See “Disconnect Cables From the Server” on page 39.
Caution – When the server is powered down, it enters standby power mode. In
standby power mode, power is still directed to the service processor remote
management subsystem and power supply fans. To completely power off the server,
you must disconnect the power cords from the power supplies.
Related Information
■ “Use the Power Button for Immediate Shutdown” on page 36
■ “Use the Oracle ILOM Web Interface for Immediate Shutdown” on page 38
▼ Use the Oracle ILOM Web Interface for Immediate
Shutdown
Caution – You might corrupt your system data during an immediate power down,
so only use this procedure to power down the server after attempting the graceful
power down procedure.
1. Log in to the Oracle ILOM web interface using an Administrator account.
The Oracle ILOM web interface System Information page appears.
2. In the left pane, click Host Management > Power Control, and select Immediate
Power Off in the Actions list.
3. Click Save, and then click OK.
The server powers down immediately.
4. Disconnect the power and data cables from the server.
See “Disconnect Cables From the Server” on page 39.
Caution – When the server is powered down, it enters standby power mode. In
standby power mode, power is still directed to the service processor remote
management subsystem and power supply fans. To completely power off the server,
you must disconnect the power cords from the power supplies.
Related Information
■ “Use the Power Button for Immediate Shutdown” on page 36
■ “Power Down Server Gracefully Using the Oracle ILOM CLI” on page 34
To Next Page
Loading...
