Sun Oracle Sun Server X4-2 - Configure SP Network Settings

Setting Up BIOS Configuration Parameters 189
6. Press F10 to save the changes and exit the BIOS Setup Utility.
Related Information
■ “BIOS Setup Utility Menus” on page 162
■ “Exit BIOS Setup Utility” on page 194
■ Microsoft’s Windows Trusted Platform Module Management documentation
▼ Configure SP Network Settings
Choose one of the following methods to specify service processor (SP) network
settings:
■ BIOS – Assign the IP address for the server SP from the BIOS Setup Utility on the
Advanced Menu.
■ Oracle ILOM – For instructions on setting the IP address for the server SP using
Oracle ILOM, refer to the Oracle Integrated Lights Out Manager (ILOM) 3.1
Documentation Library at http://www.oracle.com/goto/ILOM/docs.
■ Oracle System Assistant – For instructions on using Oracle System Assistant to
configure SP network settings, see the Oracle X4 Series Servers Administration Guide
at http://www.oracle.com/goto/x86AdminDiag/docs.
1. Access the BIOS Setup Utility menus.
See “Access BIOS Setup Utility Menus” on page 164.
2. In the BIOS Setup Utility menus, navigate to the Advanced Menu.
The Advanced Menu screen appears.