Setting Up BIOS Configuration Parameters 163
See “BIOS Setup Utility Menu Options” on page 197 for examples of each of these
screens.
Related Information
■ “BIOS Setup Utility Menu Options” on page 197
■ “Navigate BIOS Setup Utility Menus” on page 165
BIOS Key Mappings
When viewing the BIOS output from a terminal using the serial console redirection
feature, some terminals do not support function keys. BIOS supports the mapping of
function keys to Control key sequences when serial redirection is enabled. The
following table provides a description of the function key to Control key sequence
mappings.
IO Manage configuration settings for I/O devices, such as I/O virtualization
settings, and enable and disable Option ROMs.
UEFI Driver
Control
Manage PCIe drivers for all configurable devices. Menu is only available
when operating in UEFI BIOS Boot Mode.
Save & Exit Save changes and exit, discard changes and exit, discard changes, or
restore the default BIOS settings.
TABLE: Function Key to Control Key Sequence Mapping
Function
Key
Control Key
Sequence BIOS POST Function BIOS Setup Function
F1 Ctrl+Q Not applicable Activate the Setup Utility Help
menu.
F2 Ctrl+E Enter BIOS Setup Utility while
the system is performing the
power-on self-test (POST).
Not applicable
F7 Ctrl+D Not applicable Discard changes. (Not
applicable to UEFI Driver
Control menu)
F8 Ctrl+P Activate the BIOS Boot Menu. Not applicable
TABLE: BIOS Setup Utility Menus Summary (Continued)
Menu Description
To Next Page
Loading...
