Monitoring Components and Identifying SNMP Messages 243
Related Information
■ “System Chassis Components” on page 229
■ “Cooling Unit Components” on page 231
■ “Disk Backplane Components” on page 232
■ “Memory Device Components” on page 232
■ “Power Unit Components” on page 233
■ “Processor Components” on page 235
■ “System Board Components” on page 235
■ “Hard Disk Drive Components” on page 238
Power Events
The following table lists power events.
Messages and Descriptions Sensor Name
SNMP Message: sunHwTrapSlotOrConnectorError
Oracle ILOM Message: Assert
Severity and Description: Major; A sensor associated with a slot or connector
has detected an error.
/SYS/DBP/HDD0/STATE
/SYS/DBP/HDD1/STATE
/SYS/DBP/HDD2/STATE
/SYS/DBP/HDD3/STATE
/SYS/DBP/HDD4/STATE
/SYS/DBP/HDD5/STATE
/SYS/DBP/HDD6/STATE
/SYS/DBP/HDD7/STATE
SNMP Message: sunHwTrapSlotOrConnectorOk
Oracle ILOM Message: Dessert
Severity and Description: Informational; A sensor associated with a slot or
connector has returned to its normal state.
/SYS/DBP/HDD0/STATE
/SYS/DBP/HDD1/STATE
/SYS/DBP/HDD2/STATE
/SYS/DBP/HDD3/STATE
/SYS/DBP/HDD4/STATE
/SYS/DBP/HDD5/STATE
/SYS/DBP/HDD6/STATE
/SYS/DBP/HDD7/STATE
To Next Page
Loading...
