166 Sun Server X4-2 Service Manual • May 2014
2. Use the left and right arrow keys to select the different primary menu options.
As you select each menu option, the top-level screen for that menu option
appears.
3. To navigate the options presented on a top-level screen, use the up and down
arrow keys.
Only options that can be modified are highlighted when you press the up and
down arrow keys.
■ If an option can be modified, as you select the option, user instructions for
modifying the option appear in the right column of the screen.
■ If an option is a link to a sub-screen, a description of the sub-menu content
appears in the right column.
4. Modify an option by pressing the + or - keys (plus or minus keys) or by
pressing Enter and selecting the desired option from the pop-up menus.
5. Press the Esc key to return from a sub-menu screen to the previous menu screen.
Pressing Esc from a top-level menu is equivalent to selecting the Discard Changes
and Exit option from the Save & Exit Menu.
6. Modify parameters as needed.
7. Press F10 to save your changes and exit the BIOS Setup Utility.
Alternatively, you can select the Save & Exit Menu, and then select the Save
Changes and Reset to save your changes and exit the BIOS Setup Utility.
Note – After modifying any BIOS settings and selecting Save Changes and Reset
from the Save & Exit Menu, the subsequent reboot might take longer than a typical
reboot where no settings were modified. The additional delay is required to ensure
that changes to the BIOS settings are synchronized with Oracle ILOM.
Related Information
■ “BIOS Setup Utility Menus” on page 162
■ “BIOS Key Mappings” on page 163
■ “BIOS Setup Utility Menu Options” on page 197
To Next Page
Loading...
