Setting Up BIOS Configuration Parameters 195
4. In the confirmation dialog box, select Yes to proceed and exit the BIOS Setup
Utility, or select No to stop the exit process.
Note – After modifying any BIOS settings and selecting Save Changes and
Reset from the Save & Exit Menu, the subsequent reboot might take longer than a
typical reboot where no settings were modified. The additional delay is required to
ensure that changes to the BIOS settings are synchronized with Oracle ILOM.
Related Information
■ “Access BIOS Setup Utility Menus” on page 164
■ “BIOS Setup Utility Menus” on page 162
To Next Page
Loading...
