Sun Oracle Sun Server X4-2 - Page 226

212 Sun Server X4-2 Service Manual • May 2014
Related Information
■ “BIOS Main Menu Selections” on page 198
■ “BIOS IO Menu Selections” on page 213
■ “BIOS Boot Menu Selections” on page 217
■ “UEFI Driver Control Menu Selections” on page 221
■ “BIOS Save & Exit Menu Selections” on page 225
IPv6 State (R/O) Disabled/Enabled View whether the IPv6 state is
enabled or disabled.
Auto IPv6 Configuration Disabled/
Stateless/
Dhcpv6_stateless/
Dhcpv6_stateful
Disabled Autoconfiguration options are:
• Disabled: When
autoconfiguration is disabled,
only the Link Local address is
set. None of the
autoconfiguration options to
configure an IPv6 address are
run.
• Stateless: When enabled, the
IPv6 Stateless
autoconfiguration is run to
learn the IPv6 addresses for
the device.
• Dhcpv6_stateless: When
enabled, the Dhcpv6_stateless
autoconfiguration is run to
learn the DNS and domain
information for the device.
• Dhcpv6_stateful: When
enabled, the Dhcpv6_stateful
autoconfiguration is run to
learn the IP addresses and
DNS information for the
device.
Static IPv6 Address Set the static IPv6 address.
Example:
2001:0db0:000.82a1:0000:0000:123
4:abcd
Commit Commit the IPv6 configuration
settings.
TABLE: BIOS Advanced Menu Options (Continued)
Setup Options Options Defaults Description