Type of integration of RMS based results for
1/1 Octave and 1/3 Octave analysis: Linear, Fast or
Slow.
Automatic pause(s) in the Dosimeter mode, that can
be programmed based on absolute time.
Total time during working day in which the worker is
exposed to the noise. This time is considered for the
LEPd result calculation.
Steady noise level permitted for a full eight-hour
work shift.
Noise level limit below which the dosimeter does not
accumulate noise dose data.
Amount by which the permitted sound level may
increase if the exposure time is halved.
Threshold level for calculation of ULT results.
Threshold level for calculation of PTC results.
To Next Page
Loading...
