Threshold level for the trigger condition.
Time interval of checking the triggering conditions.
This parameter can be set as: Logger Step, 0.5 ms,
100.0 ms and 1 s.
Time of signal recording after every trigger
condition. The available values can be selected
from 1 s to 8 h.
Signal recording before the first trigger condition
moment: Off or 1 s.
1/1 Octave or 1/3 Octave spectrum parameters
setup: Filter and Detector.
Position in the Logger Results window that switches
on/off the Lpeak spectra saving as a time-history in
a logger file.
Manual
Błąd! Nie
można
odnaleźć
źródła
odwołania.
Position in the Logger Results window that switches
on/off the Leq spectra saving as a time-history in a
logger file.
Manual
Błąd! Nie
można
odnaleźć
źródła
odwołania.
Weighting filters for the 1/1 Octave and 1/3 Octave
analysis: A, B, C, Z.
To Next Page
Loading...
