SWF Dual Function E Series User Manual


6.6 S-Code
If you desire to change the embroidery speed from high to low at a particular place, S-Code enables you to apply the low
speed to the desired area. The embroidery work will slow down when it reaches the area programmed to make slow-
speed embroidery at the beginning. To set the low-speed embroidery, see
⑥ Slow Speed of 5.9.3 M/C Parameter Setting.
 Low Speed
It changes the speed from high to low during embroidery. Stop the high-speed embroidery work and press .
You will see [Fig.6.6-1]. Press Low Speed and START. The embroidery work will slow down.
 High Speed
It changes the speed from low to high during embroidery. Stop the low-speed embroidery work and press .
You will see [Fig.6.6-2]. Press High Speed and START. The embroidery work will get faster.
 Reset
It initializes the speeds set for particular parts.
[Fig.6.6-1] [Fig.6.6-2]

SWF Dual Function E Series Specifications

General

Brand	SWF
Model	Dual Function E Series
Category	Sewing Machine
Language	English