5.10.3 Exclude
It embroiders only the outer line of the design called.
①
Select EXCLUDE in [Fig.5.10.0-1] and you will see a screen like [Fig.5.10.3-1].
②
Press in [Fig.5.10.3-1] and you will see a menu of saving a design. Select a memory room in which
to save the design and then press . The design is saved. To cancel saving, press .
automatically moves the frame (after setting the trace) along the trace line to check if the design moves
off the frame.
[Fig.5.10.3-1] [Fig.5.10.3-2]
To Next Page
Loading...
