-
You can call a design from the memory for embroidery work. You can also copy or delete the designs or
copy them to external devices.
You will see the screen in [Fig.5.7-1] if the design is not in the memory or if you have not call any design from the
memory. If you have previously called a design, it will appear on the screen([Fig.5.7-2]).
If there is no design called as in [Fig.5.7-1], a number of functions will not be available (displayed in gray color). Those
functions will become available once a design is called.
If you press in the screen [Fig.5.7-2], you will see designs stored in each memory room ([Fig.5.7-3]). You
can store total 100 designs in the memory. 20 designs will appear on one screen. Refer to an example [Fig.5.7-1] for
calling a design.
5.7 EMB Call
[Fig.5.7-1]
[Fig.5.7-2]
To Next Page
Loading...
