7.4.0
Machine Setting and Troubleshooting (※Dual DM Series)
After power cord connection, if power is not supplied after switch-on, troubleshooting actions need to be taken with
reference to the following. Check the location of fuses as in <Fig. 7.4.1-1> and <Fig. 7.4.1-2> and change fuses.
(1) Power Fuse (based on 3-phase)
[Fig.7.4-1]
< Front side of Control Box >
Fuse specifications: 250V , 30A , 31.8mm
Fuse quantity : 3EA
To Next Page
Loading...
