5.9.7 The others setting
When Others is pressed from the setting menu, the screen as in <Fig. 5.9.7-1> appears. Others has six setting sub-
menus including cutting needle bar setting, thread sensing setting by head, trimming-related setting, sound volume
setting, head select setting, and thread setting.
[Fig.5.9.7-1]
(1) Cut Needle Set
Cutting function refers to cutting, instead of embroidery, the work material in the desired shape using a special
cutting needle instead of an ordinary needle. To use this function, you must turn off the functions such as thread
detection and trimming. CUT NEEDLE SET is about automatically turning off the functions unnecessary in cutting.
[Fig.5.9.7-2] shows the screen after selecting CUT NEEDLE SET in [Fig.5.9.7-1]. Pink means the needle bar is for
embroidery and bright yellow for cutting.
[Fig.5.9.7-2] [Fig.5.9.7-3]
To Next Page
Loading...
Need help?
General
