Symmetricom TimeSource 3100 User Guide

097-72020-01 Revision K – December 2005 TimeSource User’s Guide 115
Chapter 4 TL1 Reference
Commands
TS3100
(cont’d)
IPEM1=a.b.c.d
(See Note 1)
a = 0 to 255 IP address of primary element manager
(port 5550 connects to this element
manager to send autonomous messages,
disconnects when transmit is complete)
b = 0 to 255
c = 0 to 255
d = 0 to 255
IPEM1PORT=a
(See Notes 1, 2, 3)
a = 0 to
65535
Port address of primary element manager
(port for IPEM1 address)
IPEM2=a.b.c.d
(See Note 1)
a = 0 to 255 IP address of alternate element manager
(port 5550 connects to this element
manager to send autonomous messages,
disconnects when transmit is complete)
b = 0 to 255
c = 0 to 255
d = 0 to 255
IPEM2PORT=a
(See Notes 1, 2, 3)
a = 0 to
65535
Port address of alternate element manager
(port for IPEM2 address)
IPINACT=a
(See Note 1)
1 = 0 to
10000
Port 5550 closes the connection to the
Element Manager if no autonomous
message are sent during this number of
100-ms units (0 to 10000, where 0
deactivates the timer; for example, 100 = 10
s)
ALARM=x x=HOLD-OV
ER
HOLDOVER alarm
x=GPS GPS alarm
SPAN
A & B
ALARM=x x = LOS LOS alarm
x = AIS AIS alarm
x = ERROR ERROR alarm
RO
A & B
ALARM=x x = LOS LOS alarm
x = ERROR ERROR alarm

Symmetricom TimeSource 3100 Specifications

General

Brand	Symmetricom
Model	TimeSource 3100
Category	GPS
Language	English