7-4
1234678
5
pocH-100
i
Revised June 2008
SAFETY INFORMATION & WASTE DISPOSAL
INTRODUCTION
7.1.6. Warning labels on the instrument
• This equipment must be grounded.
• To avoid electrical shock, disconnect supply before
servicing.
• For the continued protection against risk of fire, re-
place only with fuse of the specied type and current
ratings.
• Never open the instrument’s cover on the back when
the power switch is on. Do not open this cover unless
absolutely necessary. There are no user serviceable
parts inside.
The printer head may get very hot. When opening the detector cover to clean the trans-
ducer aperture, follow the instructions in chapter "Clean
aperture of TD chamber" page 4-13.
Because there is a risk of electric shock, do not open
this cover for any other purposes.
• Static electricity may damage the electronic circuit via
the connectors on the right side. Do not touch connec-
tor pins with hands.
• Turn the main switch OFF before inserting or removing
connectors or program cards.
Warning, HotWarning
Contact with static electricity at the lower left part at the
front side may result in abnormal instrument operation.
During operation, do not touch any parts other than the
contrast adjustment lever.
Warning
Static electricity may damage the printer head.
Do not touch.
Warning
Warning
Warning
To Next Page
Loading...
